Keep your hardwood and laminate floors looking clean longer by doing the following:
 

• Do not let sand, dirt or grit build up. They can act like sandpaper and actually abrade and dull the floor finish.
• Keep pet's claws properly trimmed to avoid excessive scratches and gouges.
• Never over saturate a wood floor. Too much water can cause your floor to swell and cup.
• Do not use wax, oil soap or other household cleaners on your polyurethane finished wood floor.
• Do not use the Mohawk FloorCare Essentials Cleaners on paste wax finishes.

 Protecting your Tile investments:

• Vacuum or sweep regularly to remove any dirt or grit.
• Remove spills promptly using a clean, dry Microfiber cloth and clean residue from spill with Mohawk FloorCare Essentials Tile and Grout Cleaner and a clean microfiber      cloth.
• Use felt protectors under heavy pieces of furniture and chairs.
• Use protective mats at all exterior entrances.
• Cleaners should never contain acids or ammonia. Acids can damage the grout and the glazed surface of the tile, and ammonia can discolor the grout.
• For removing grease, soap scum and mildew stains from grout joints see your flooring retailer for a professional strength grout cleaner.
• Never use oil soaps or wax to clean your tile floor.
• Protect your floor when using a dolly for moving furniture or appliances. Never slide or roll heavy furniture or appliances across the floor.
• If you need to remove sealers or waxes from your tile floor see your flooring retailer for a tile sealer and adhesive remover.

Safe for your carpet

Mohawk FloorCare Essentials Carpet Stain Remover has been awarded the Carpet and Rug Institute - CRI Seal of Approval certifying it as a superior carpet cleaning product and the WoolSafe Mark identifying it as safe and effective in cleaning and protecting quality carpets. Beginning in 2007, Mohawk changed its warranties to require the use of products that have earned the CRI Seal of Approval for regular cleaning to keep the warranties valid. Go ahead and try it for yourself. Trying is believing!


Carpet and Rug Stain Removal:
 

• Treat stains as soon as possible for best results.
• Completely blot up wet areas with microfiber cloth.
• Do not rub, as rubbing may alter the carpet texture.
• To successfully remove any liquid based stain, it is important to keep as much of the soil as possible from penetrating into the carpet.
• Spray the Mohawk Carpet Stain Remover directly onto the soiled area.
• Agitate cleaner into the carpet pile by gently stroking the stained area with the rounded edge of the Carpet Cleaning Key. Wait 1-3 minutes until the soil loosens.
• Blot by pressing straight down with a microfiber cloth. Work from the outside of the spot to the inside.
• Continue to spray and blot until the stain is gone. Do not over saturate carpet - use small amounts of solution and blot frequently.

*Safe for use on all stain resistant carpets.